Royal Overhead Doors

Fiber Glass

Contact Us

Follow Us:

Commercial Residential Openers

The Premier Garage Door Solutions Provider in Toronto, Ontario, Concord, Etobicoke, North York, and surrounding areas

Make your carriage garage doors be more aesthetically-pleasing and more functional with the garage door solutions of Royal Overhead Doors Ltd. With more than 30 years of existence in the industry, Royal Overhead Doors has proven its supremacy when it comes to providing quality sectional overhead and carriage garage doors for commercial, residential, and industrial requirements as well as rolling steel especially in Toronto, Ontario, Concord, Etobicoke, North York, and surrounding areas.

Superior quality of workmanship, materials, and services make Royal Overhead Doors ahead of its pack. From doors to gates and from docks to controllers, Royal’s commercial, residential, and industrial door solution has almost everything that your factory, warehouse, house, office, or docks need to keep unnecessary elements from disrupting your factory workflow or the harmony inside your house thereby ensuring the products flowing smoothly or giving peace of mind to your house’s inhabitants. Specifically its carriage garage doors, Royal has hand-crafted wood carriage doors for more country look and custom-designed doors which can be insulated or non-insulated, depending on the needs of the customers.

Voted as the number one provider of door products and services in Toronto, Ontario, Concord, Etobicoke, North York, and surrounding areas, Royal adheres to the principles of safety, quality, and dependability. Royal always address any door-related problems in a prompt and efficient manner.

Royal Overhead Doors Ltd. is the company to call for any door-related products you have, whether it’s remodelling your carriage garage door or installing new overhead sectional doors. Royal’s services are especially available in Toronto, Ontario, Concord, Etobicoke, North York, and surrounding areas. Call them now for more details regarding the products and services they offer.

Royal Overhead Doors offers a wide range of Commercial and Industrial products. From doors to gates from docks to controllers, Royal Overhead Doors has everything that your factory, warehouse, office or dock needs to keep the elements out and keep the products flowing. Below you will find a list of the different product categories at Royal Overhead Doors.

Doors Gates Control

Flexible Docks Interlock Switches

Rolling Sliding Stations

Strip Levelers Card Readers

Sliding Swinging Key Switches

Traffic Seals Emergency Egress

Sectional Rolling Ceiling Pulling

Cold Storage Shelters Photocells


Bumper Timers

Openers Security Remote

Zip Rolls Loop Detectors

Chain Hoist Counter Sensors

Locks Relays

Fire Barrier Keyed Disconnects

Bug Blockers Pneumatic Edge Stops

Curtain Key-less Entry

Safety Device Seals


    THERMOSPAN 200-20/200/150/125


    Door sections shall be of steel/polyurethane/steel sandwich type construction. The TM will have a .022 embossed exterior. Tongue and groove design will provide weather tight meeting rails.

  • 1.02 FINISH

    Factory finish will be baked-on polyester primer and white polyester finish coat.

  • 1.03 GLAZING

    Optional 1/8",1/4, or 1/2" glazing available in 24" x 6" porthole Window or aluminum sash section.

  • 1.04 TRACK

    All track vertical mounting angles and brackets will be ASTM-526 commercial quality 15 GA. G-40 hot-dipped galvanized steel. Available in 2" or 3" type with graduated wedge type weather tight closing.

  • 1.05 HARDWARE

    All hinges and brackets will be made from hot-dipped galvanized steel. Track rollers will be case hardened inner steel races with 10 ball bearings for 2" or 3" track.


    Springs will be torsion type per ASTM-229 to provide a minimum of 10,000 cycles of use.(Higher cycle spring options available.) Spring fittings and drums will be made of die-cast high strength aluminum. Pre-formed galvanized steel aircraft cables with a minimum of 5:1 cable safety factor.

  • 1.07 LOCKS

    Interior slidelock with hole to receive a padlock standard. Optional keyed rim-cylinder lock bar available.

  • 1.08 WINDLOAD

    Doors will meet or exceed 15.2 PSF windload per ANSI/NAGDEM 102-1988 in accordance with ASTM E-330-70.

Copyright ©2014 Royal Overhead Doors. All Rights Reserved